How to Refill Bona Mop? [All Steps In One Guide]

A bona mop is a device that requires refilling bottles with cleanser before mopping. Therefore, you should learn how to refill the Bona mop before proceeding to the main task.

Refilling the mop is an essential task that needs to be done regularly. To refill it, a user needs to be patient and separate all the parts of elements from the mop head. After that, the bona mop head should be opened or triggered to refill the cleanser.

However, it sounds straightforward but could feel complicated when you try them out in real. For that reason, in this article, I will guide you through the process of refilling the mop step by step.

How to Refill the Bona Mop?

As mentioned above, it is easy to sound but a little complicated. But still, you can handle the task by following some steps I added below. So, here are the steps of what to do about it.

Step 1: Gather Supplies

Before refilling this mop, ensure you have all the necessary supplies. You will need a clean bucket, Bona hardwood floor cleaner, and a mop.

Step 2: Prepare the Cleaning Solution

Once you have gathered all the supplies, prepare the cleaning solution. Fill the bucket with warm water and add the Bona hardwood floor cleaner as per the instructions mentioned in the bottle.

Generally, you need to add one cupful of cleaner for every gallon of water.

Step 3: Remove the Mop Head & Refill

Next, remove the mop head from the handle by gently twisting and pulling it off. You may need to use some force to detach it, but be careful not to break the mop head or the handle.

Now it is opened, refill the bottle or container with the solutions.

Step 4: Soak the Mop Head

Once you have removed and refilled its mop head, soak it in the cleaning solution for a few minutes.

Ensure the mop head is completely submerged in the solution and allow it to soak for at least five minutes.

Step 5: Wring Out Excess Water

After the mop head has soaked, remove it from the cleaning solution and wring out the excess water. Hold the mop head over the bucket and twist it to remove as much water as possible.

This will ensure that the mop head is not too wet and can clean the floors effectively.

Step 6: Attach the Mop Head

Now that the mop head is ready, it’s time to reattach it to the mop handle. Twist the mop head back onto the handle until it clicks into place.

Step 7: Clean Your Floors

With your Bona mop refilled and ready to use, it’s time to clean the floors. Dip the mop head into the cleaning solution and wring it out again before you start the cleaning.

Use the mop to clean the floor in sections, starting from one end of the room and working your way toward the other end.

At that time, ensure you’ve rinsed out the mop head frequently and change the cleaning solution if it gets dirty.

Step 8: Rinse the Mop Head

Once you have finished cleaning your floors, rinse the mop head thoroughly with clean water to remove any remaining dirt. Wring out the excess water and hang the mop head to dry.

How Do I Refill Bona Premium Spray Mop?

Another best way to clean the surface is using a premium spray mop of this brand. It looks similar to the bona traditional refill mop, but their difference lies in their features.

However, if you are looking for an efficient way of refilling this premium spray mop, check below. There are all the steps that you should follow:

1. First, remove the old button from the mop. Press the release button at the top of the mop head.
2. Now, insert the new mop pad and ensure that the Velcro tabs with this are correctly aligned.
3. Press on to the mop head to secure it in a new place appropriately.
4. Refill the bona mop bottle with a cleaner and begin cleaning after that. That’s it; you are done.

Frequently Asked Questions (FAQs)

How Do You Take Apart A Bona Mop?

I generally remove the mop handle by stepping on the pad part. It makes the job easier for me as I pull out the handle. Then, I twist the joint to pull it out of the pad holder.

How Much Bona Cleanser Do I Mix with Water?

Any Bona cleaner hardwood floor usually requires a concentration ratio of 1:32. That means you need to take 1 part of the concentrate and mix it up with 32 parts of water.

Can I Put My Solution to The Bona Mop?

Yes, you can. Bona mop bottles don’t get damaged if you use only fresh, organic cleanser in the mixture. It is recommended especially for people with deep concerns about their kids and looking forward to making a kid-friendly DIY cleanser.

How Do You Put Bona Refill in A Bottle?

Putting bona refill in a bottle is such an easy and relatively straightforward technique. All you need to concentrate on some matters include grabbing the top part of the bottle, twisting it, and pouring refill onto it.

But you should focus on the tightness of the bottle sprayer. Lock it and twist it before removing the bottle entrance. Then pour or refill the bottle with cleanser and turn it off again.

When locking the bottle lid, turn it off appropriately to prevent messes.

Does Bona Refill Water or Oil Base?

Bona has water- and oil-based refills, which are worth cleaning depending on the user’s demand. Both of them provide high-quality professional outlooks.

Yet, oil base bona is well-concentrated for giving a fresh, polished perspective. The water base is also suitable for implementing excellent protection on hardwood floors.

Conclusion

Refilling the bona mop is a simple process that can be done in a few easy steps. Following the steps mentioned earlier, you can keep the floors clean and maintain a healthy living environment.

After reading them, you don’t need to worry about how to refill the Bona mop and what’s the real way because all the steps are clearly described above, so anyone can understand them.

However, a regular cleaning with Bona hardwood floor cleaner will help keep the floors looking great for years. Therefore, you should take advantage of this chance.