Why Is My Spray Mop Leaking? Learn Easy Ways To Fix It

If you have a spray mop, then you know how convenient they are. Just fill up the reservoir with your favorite cleaning solution and you’re good to go. But what do you do when your spray mop starts leaking?

It can be frustrating and even a little bit messy. There are several reasons why a spray mop might leak. The most common reason is that the mop head is not securely attached to the handle. Another possibility is that the bottle is not screwed on tightly, or that the seal is damaged. 

If the mop is leaking, it is important to determine the cause so that the problem can be fixed. But don’t worry, I’m here to help. In this article, I’ll discuss some of the common reasons why spray mops leak and how you can fix the problem.


Why Is My Spray Mop Leaking?

When your spray mop leaks while you’re cleaning, it can be extremely frustrating. Your floors will be left wet and streaky, not to mention a waste of time and effort.

Whether your spray mop is, you can try this troubleshooting to get the job done. 

1. Check the Reservoir

The first thing you’ll want to do is check the reservoir. Make sure that it’s tightly screwed on and that there are no cracks or leaks. If the reservoir is cracked, it will need to be replaced.

2. Check the O-Ring

The O-ring is a small rubber ring that seals the joint between the trigger and the handle. Over time, these O-rings can become worn or damaged, which can cause leaking. Inspect the O-ring for any damage and replace it if necessary.

3. Check the Trigger Mechanism

If the trigger mechanism is damaged, it can cause leaking. Inspect the trigger for any damage and replace it if necessary.

4. Clean the Nozzle

If the nozzle is clogged, it can cause leaking. Remove any debris from the nozzle and make sure that it’s clear before using your spray mop again.

5. Spray mop is fully assembled

Many people overlook this point which leads to leaking. So make sure the mop is connected properly and the mop head is not loose.

6. Clean the mop head

If there is a blockage in the mop head, then the water doesn’t come out and causes leaking. So clean the mop head with warm water and mild soap. 

7. Change your mop pad

When the mop pad gets old, you should inspect the pad and check if there is any wear and tear. Due to fiber loose, the mop pad can cause leakage. So you should replace the mop pad. 

Why is my Bona spray mop leaking?

Leaking is a common issue with bona spray mops. There can be various reasons. Below are the most common causes and fixing the issue. 

1. Leaky Water Container

The water container can leak if it doesn’t sit properly in the mop structure or the there is some crank in the water tank. Make sure the water tank is properly sealed before using it with the mop. So you should inspect the water tank, fill it adequately, and place it in the mop structure properly to avoid leaks. 

2. The hose might be kinked

The entire mop is made out of plastic, and some parts like the hose can be kinked or broken. In this case, you can see leakage. If the hose is kinked or other any part is broken, you should replace it. 

3. The O-ring might be damaged

O-ring damage can be a major reason for leakage. When you are using the mop for a long time the O-ring can wear out and the mop starts leaking. To solve the problem, simply change the O-ring and there will be no leakage. 

4. Clogged Nozzle

If the nozzle gets clogged, the cleaning solution doesn’t spray properly and that causes leaking. Due to the heavy cleaning solution, the spray nozzle gets clogged. So clean the nozzle and remove clogging. 

Why is my O-cedar spray mop leaking water?

O-cedar is a quality spray mop in the market and the leaking water problem is very disappointing. 

1. The silver-plated components on your unit are deteriorating

Regular usage and poor maintenance can damage silver-plated components. In this case, it would be better to fix the damaged part or you can consult a professional as soon as possible. 

2. A bad seal on the bottom of your unit

The bottom seal which is known as an o-ring is used to prevent these types of leakage. But unexpected pressure on the unit can break the o-ring and cause leakage. To check it, unscrew the bottom plate and inspect the seal. If it is damaged or broken, then replace it. 

3. The control valve is inefficient

If the inside control valve is not working properly or the drainpipe is running at maximum capacity, then it can cause leakage. Fix the problem with a professional.

4. The unit is too old

If your O-cedar mop unit is too old, then you may experience many mechanical problems which also can cause leakage. Many parts of the mop don’t work properly due to wear and tear. So it would be better if you replace the mop with a new one.

Why is Shark genius steam mop leaking?

If your Shark Genius steam mop is leaking inner water from the bottom, it could be due to a few different reasons.

  • One possibility is that the mop’s inner reservoir is not properly secured and/or inserted, causing water to leak out.
  • Another possibility is that the mop’s seals or gaskets are damaged or worn, which can also cause leaks.

If your mop is leaking, we recommend that you check these things first and then contact Shark Customer Support for further assistance if needed.

Why is Swiffer wet jet spray mop leaking?

If you have been using a Swiffer Wet Jet Spray Mop and it has been leaking, you may be wondering why. It may be caused by a few factors:

  • One reason for the leaking is the pads are not attached properly. Make sure that the pads are snapped into place and that the Clip is tightened.
  • Overfilled tanks can also cause your Swiffer Wet Jet to leak. Make sure to only fill the tank to the line marked “MAX” on the side.

If your Swiffer Wet Jet is still leaking after checking these things, please contact customer service for further assistance.

Related post: Why does my Swiffer wet jet won’t spray

Frequently Asked Questions (FAQs)

1. How do I stop my infuse mop from leaking?

Leaking on the spray mop can happen for various reasons. However, first, you should ensure the water tank is filled under the cap and connect it properly with the mop mechanism according to the manufacturer’s manual.  

2. How do you unclog a spray mop?

Cleaning is the only way to unclog the spray mop. You need to clean the pole hose with warm water and cotton. Thus, you can remove debris from the spray mop and unclog it. 

3. How do you fix a spray mop without spraying?

If the spray nozzle is clogged, the spray mop won’t work or doesn’t spray adequately. The nozzle is hard to clean. With high water pressure, you can clean it. Changing the nozzle is also a good solution. 

4. Can I put vinegar in my spray mop?

Every mop spray brand recommends using their specific cleaning solution with the spray mop. Though you can use a vinegar solution. But it may impact the warranty of the mop. 

5. Is Bona Spray mop good for tile floors?

Yes, Bona spray is good for tile floors. It works best on all kinds of hard floors. It effectively removes dirt, debris, and sticky mess from the floors. 

Final Words

If you’ve ever taken care of a home, an apartment, a condo, or any other kind of residence, you know that mopping is one of the most arduous and time-consuming tasks.

Luckily, there are innovations in the market that make cleaning much easier and quicker than it used to be. Spray mops are one of the most wonderful tools for cleaning. 

But spray mop can leak for various reasons. So you can go through this troubleshooting for different spray mops. Surely, you can fix the leaking of your spray mop. Still, if your spray mop is leaking, don’t despair! In order to get your mop working again, you can try a few simple fixes.

We will be happy to hear your thoughts

Leave a reply

Mops Review